company news about Pneumatic Grease Pump -equipment maintenance

equipment maintenance
Proper maintenance of the equipment to keep the equipment in good condition is to prolong the service life of the equipment and maintain the
It is a necessary condition to ensure the efficient operation of the equipment. Equipment maintenance needs to pay attention to the following points:
1. The compressed air should be filtered to prevent sand and dust in the air from entering the air pump and causing wear and tear on the air distribution slider and the air pump.
Cylinder and other parts.
2. The compressed air used should not exceed 0.8MPA after pressure adjustment, so as to avoid equipment overload and affect the high-pressure hose
service life.
3. The high-pressure hose is not allowed to be bent strongly or crushed by heavy objects during use, so as to avoid damage to the high-pressure hose.
4. When working and resting, the air source should be disconnected, and the oiling gun should be pulled to drain the oil. Reduce the oil pressure in the equipment to prolong the
Service life of high pressure hoses.
5. The oil injection pump needs to be regularly filled with lubricating oil at its air intake. Frequent filling of lubricating oil can effectively improve the oil injection pump
The service life of the inner reversing mechanism.
6. During the disassembly process, the parts should be handled with care to avoid scratching the surface of the parts and damaging the parts to be dismantled.
precision.
7. The oil should be kept clean, and impurities such as sand grains and iron filings should not be mixed.
8. Do a good job of cleaning and maintenance at ordinary times, and clean the entire oil circuit system regularly. Such as the gun of the grease gun
Remove the nozzle for cleaning, remove the filter screen in the oil filling pump for cleaning, etc.