company news about How to use the grease gun

1. Loosen the pump body, insert the simplified pump into the oil barrel, and pay attention to the mouth of the barrel should be immersed in the oil for more than 5CM to prevent air leakage. Grasp the handle and pull the lever back evenly until the oil is full, taking care not to leak air. If a steel cylinder is used, it is impossible to judge whether it is full of oil or whether it is mixed with air. Damage to equipment if air is not removed. Oil suction is not full, entrained air
2. Screw on the pump body, be careful not to tighten it. Press the locking plate with your hands, pull the lever slightly backwards, then push it forward to the end, and back and forth several times, the air in the oil can be cleared, and the air will be squeezed out from the gap between the cylinder and the pump body due to the pressure of the spring. In fact, the exhaust valve on the pump body of the oil gun cannot eliminate the simple
If there is a small amount of air in the pump body, the most effective way is to rotate the pump body back and forth several times, and then tighten the pump body. A good oil gun will produce oil after a few times, and a poor oil gun will not produce oil after many times. Empty two teeth, press the locking piece and pull the lever back and forth. Features of the transparent grease gun: The transparent tube also has the function of clearly knowing the remaining amount. The amount of refueling can be determined according to the amount of oil used, which can save fuel. It is easy to find whether there are air bubbles in the tube. Due to the memory effect of the transparent tube, after being deformed by an external force, the original shape can be restored after removing the external force, and the steel tube cannot be used after being deformed. Since the transparent tube and the rubber piston are easy to engage, it is easy to suck up oil without trapping air. The tire pressure will not be damaged, the hammer will not be damaged, and the metal will not be damaged. The general pump body is made of zinc, aluminum, and cast iron. We use nylon plus titanium aluminum alloy, which feels very good, easy to oil, and the pressure
High, durable, long life, and slightly stronger. Since most parts of the whole are made of high-strength plastics, the weight is reduced, the processing is reduced, and low carbonization is achieved.