company news about Grease Gun Introduction Composition

Grease Gun A grease gun is a hand tool for lubricating mechanical equipment. It can be equipped with iron gun shaft (iron gun head) or hose (flat gun head)

Fuel nozzle. It is convenient for the refueling position to be in a place with ample space, and an iron gun rod (iron gun head) can be used, and the refueling position is concealed and cornered.

Use a hose (flat tip) to add oil. This product has many advantages such as simple operation, convenient carrying and wide application range.

Center tool.

Structure and composition

The grease gun consists of four parts: handle, gun head, barrel and handle. The nozzle can be divided into two types: pointed nozzle and flat nozzle. The accessories are divided into two types: hose and hard tube.

The inside of the barrel is composed of cups, springs, steel balls, exhaust screws, etc.

Classification

There are different types of grease guns, such as pneumatic grease guns, manual grease guns, pedal grease guns, and electric grease guns.

Tips/Major Faults

One is that the leather bowl is not good, which is a common problem of almost all domestic oil guns, but it is no wonder that the structure of an oil gun is relatively small compared to ordinary tools.

For more complicated ones, selling it for more than ten yuan is probably the only way to do it;

The second is that the oil pressure mechanism is not good, but if there is no problem with the spring and the check ball, it probably cannot be repaired.

The third is some failures in use. Many of the failures in use are caused by your own operation, and you can find ways to avoid them. Like grains of sand, once

Mix a few grains of sand into the butter, and if you use a pointed grease nozzle at this time, you will be so angry that you have to throw the grease gun to relieve your hatred, and for the design

It is not good to be prepared, but these are actually caused by yourself in most cases. Therefore, it is necessary to keep the butter used clean, not to use unclean

Oil the tools, and cover the oil container in time.

Responses

1. If there is a hard pull rod, you can pull the rod several times, so that the air inside can be mixed with the grease, and the volume of a single air bubble may be reduced

The problem will be fixed, but not every time.

2. The most effective method is the deflation method, but this requires hardware support. Some gun bodies have an exhaust port design. When you slowly open the exhaust screw

The air inside will come out. I have used a SDA brand grease gun, which has a structure with exhaust screws, but it can’t remove the gas. I don’t know if it’s their parrot.

Learn the tongue or mean something else or I don't know how to use its unique function, I make a small modification to it (also an invention of mine), put it

Drill a hole in the screw or use a saw to cut a slot so that when you slowly loosen the screw, the gas inside can escape from the slot.

coming. Of course, if you don't have such an innate structure, you can also obtain it through your own transformation.

3. The ultimate skill, and it has been tried and tested repeatedly, and has been built repeatedly. When you feel that there is gas in it and you can't pump it out, just turn the oil gun body and the pump body to combine

A few times or a few times back and forth (turning and pressing) to ensure your success. The reason is not difficult, that is, when you turn, the gas bubbles inside actually

After turning to another part, the original part is filled with lubricating oil, so the problem is solved.